Serial ATA RAID User’s Guide
5. Next, another message box will be popup to tell user that disk setting
has been changed and ask whether to restart the computer or not.
Click “Yes” button to restart the computer and you can get new setting.
Or click “Cancel” button to skip restarting.
b) To create a RAID 0 (Stripe) array, follow these steps:
NOTE:
You should use two SATA hard disks to create a RAID0 array.
1. “Configuration”
→
“Create Raid”
→
“Raid Type”
→
RAID 0.
2. From the drop-down box “Block Size”, select the block size you want
or use the default value
“64K”
.
3. From the drop-down box “Mode Type”, select the mode type you want
or use the default value
“DMA”
.
32
