Serial ATA RAID User’s Guide
Step 3. BIOS Utility Operation
Note:
For the best performance and reliability, please read “Performance Hints
and Recommend Setting” section in
Step 0
.
Starting BIOS Utility
1. Boot your system. If this is the first time you have booted with the
SiS964 and the drives installed, the BIOS will display the following.
Silicon Integrated Systems Corp. RAID BIOS Setting Utility v0.XX
(c) 2003-2005 Silicon Integrated Systems Corp. All Rights Reserved.
Press <Ctrl><S> to run BIOS Setting Utility
Scan Devices. Please wait…………
Primary Master : XXXXXXXXXX XXXXXMB UDMA X
Secondary Master : < SATA Device Not Found >
[ RAID Information ]
[ RAID Information ] includes some statements. See below :
a.
No RAID Install !!
Not any completed RAID exists.
b.
Raid 1 (Mirror) : [Disk X] [Disk X]
Have a RAID set.
c.
Broken RAID detected. Do you want to enter Setup Menu (Y/N)? Y
You can select [Y] to enter setup menu to handle it. Or you can select
[N] to ignore this message.
d.
Found a new HD! Do you want to rebuild RAID 1? Y
Occurs when
the controller has broken Raid 1 and single HDD existing simultaneously
and the location of single HDD is just conformed it’s rebuild conditions.
e.
The Raid is wrong!! Do you want to fix it??(Y/N)
Occurs when the
locations of two SATA HDD change owing to ATA HDD existing or not.
7
