Serial ATA RAID User’s Guide
Next, you can click “Yes” button to start the operation or click “No” button
to cancel. When you click “Yes” button to start this operation, the
operation will begin.
When this operation is beginning, you still can click the destroy button on
the “Create Stripe RaidSet” dialog to stop this operation.
But this action
will cause the data of the source disk broken
. And the following
message will be popup to remind you.
8. If the operation is
“Source is a boot device”
of
<Split data into
Raid0 Set>
, the following warning message will be popup, seeing
below:
Next, you can click “Yes” button to start the operation or click “No” button
to cancel. When you click “Yes” button to start this operation, the following
warning message will be popup.
35
