Serial ATA RAID User’s Guide
Step 1. Hardware Setup
Hard Drives setup
The South Bridge SiS964 SATA controller only supports two Serial ATA
hard drivers.
For RAID 0 (Striping array)
Any of 2 SATA Hard disks would make a stripe system.
The South Bridge SiS964 SATA controller only supports combination 6.
NOTE:
Storage Capacity: the number of hard drives times the capacity of the
smallest drive in the disk array
Working Speed: the speed of the lowest drive in the disk array
For RAID 1 (Mirror array)
Any of 2 SATA Hard disks would make a mirror system.
The South Bridge SiS964 SATA controller only supports combination 6.
NOTE:
Storage Capacity: the capacity of the smallest drive in the disk array
Working Speed: the speed of the lowest drive in the disk array
For JBOD (Spanning array)
Any of 2 SATA Hard disks would combine to a JBOD system.
The South Bridge SiS964 SATA controller only supports combination 6.
NOTE:
Storage Capacity: the number of hard drives times the capacity of the
smallest drive in the disk array
Working Speed: the speed of the lowest drive in the disk array
4
