PATIO COVER INSTRUCTION SHEETS
PATIO COVER INSTRUCTION SHEETS
M
A
B
ANCHOR the POSTS:
Set each post in front of the
chaulk line…
use 4ft level to
plumb level the post on front
and side of each post.
Once
post is plumb level
both directions drill a
3/8" hole
through the
Bottom Post Bracket(#K)
into the slab and insert the
WEDGE ANCHORS and
tighten
Repeat for each post
Carefully unwrap the next roof panel…look for any dents….turn panel so any dents or dings are
up on top side.
You will be
starting on LEFT side
of patio cover (looking from backyard at the house).
Run a
bead of sealant
on the
TOP SIDE
of the first installed roof
in the MALE EDGE only
, as shown
in dwg.
STEP #5 : Setting All Roof Panels
LifeRoom ONE Installation Guide
