PATIO COVER INSTRUCTION SHEETS
PATIO COVER INSTRUCTION SHEETS
STEP # 3 : Measuring, Leveling, Cutting, Fastening 3 x 3 Posts(#J) Radius Corners to Edge Beam(#F)
NOTE: the bottom of the 3" Edge Beam(#F) should never be lower than 80 inches
Place a Level on
Front Edge
of slab to determine which is the
LOW Side
(the left side or the right
side). After determining the
LOW Side
, measure from slab up to the
bottom of the Roof Header
(#B)
on that
LOW side
Insert this second 3" Edge Beam into the top of the Setback Brackets. Make sure the ends of
both 3" beams are lined up. Fasten the Double beam to the Setback Brackets using 4 #14 tek
screws each side.
LifeRoom ONE Installation Guide
