PATIO COVER INSTRUCTION SHEETS
PATIO COVER INSTRUCTION SHEETS
STEP #9: Finish Fastening & Sealing
A
B
C
D
E
F
G
NOTE: Do Not walk of Roof Panel SEAMS
Fasten TOP side of Roof Panels
downward
through the
Roof Header(#B
)
Leg
into the
roof panels
using (3)Three #10 tek screws.
**Keep All fasteners 4inches away from
all roof seams**
(3) Three screws in each panel…. 4" from
each seam and (1) One in the Center
Caulk around and on Top of every roof
screw just fastened
Squeeze a smooth
Bead of Sealant along
the FRONT LIP of Roof Header(#B)
and the Roof Panel
If Sealant at
Roof Seams
did not Squish up, go
ahead and
Caulk over the Roof Seams
where
it is needed
**DO NOT WALK ON Roof Seams**
Caulk around & cover the TOP Screws of
Fascia(E) and along the leg to the Roof
Panel
Fasten the BOTTOM of all Roof
Panels Upward through the
Bottom Leg
of the
Roof Header
(#B)…
(3)Three screws each panel
4inches from each Seam & (1)one in
the Center
Fasten all Roof Panels to 3" Edge
Beam(#F) using the 5" Tek screw
with washer.
(3) Three screws each
Roof Panel. Keep
4inches away from
each Roof Seam and one in the Center.
Tighten to a very
Slight Dimple
of the
top roof skin…NOTE: not too tight.
Seal
around the washer and cover the screw
head and washer completely
ROOF PANELS
LifeRoom ONE Installation Guide
