PATIO COVER INSTRUCTION SHEETS
PATIO COVER INSTRUCTION SHEETS
Make sure both halves of the beam are straight, then fasten through the Top Post Bracket into the
second Beam
then into the Beam Splice using
(2)two #14x1-14/ tek screws
Rotate the beam over twice, make sure the beam is straight, then fasten repeating steps C&D fastening
through the Top Post Bracket(#I) into both Edge Beams & the Beam Splice(#G)
Rotate the beam over one time so the
Top Post Bracket
legs are up, then fasten
(2)two #14x1-1/4"
tek screws
into each 3" Edge Beam (4 total)
Rotate the beam one time. Butt measuring tape to the Top Post Bracket(#I) & measure to the left
___" then move measuring tape to the other side of bracket and measure to the right ___”
NOTE:
refer to the
LAYOUT SHEET
for your size S.I.P. Patio Cover Top Post Bracket spacing
measurements
D
E
F
G
A
STEP 2B: Double Beam Preparation & Assembly
Follow & Complete STEP # 2A : 3" EDGE Beam Preparation STEPS A through G.
LifeRoom ONE Installation Guide
