Fostex MR-8MKII, Owner'S Manual

Page: 125 / 154

125
MR-8mkII Owner’s Manual (Burning an audio CD)
MIDI OUT USB HOST COMPACTFLASH CARD
Song data which can be recorded to a CD-R/RW disc
You can record a stereo WAV file converted from two mono files on tracks 7 and 8 (final mixdowned files) to
a CD-R/RW disc in the CD-DA format. Mixdowned files on tracks 7 and 8 can be created by in either of the
following track bouncing methods.
(1) Bouncing tracks 1 through 6 to tracks 7/8 of the same song.
(2) Bouncing tracks 1 through 8 to tracks 7/8 of the new song.
See pages 65 through 74 for details about track bouncing. See pages 116 and 117 for details about how to
convert files on tracks 7 and 8 to a stereo WAV file.
Connecting an external CD-R/RW drive
You can connect a CD-R/RW drive to the [USB HOST] port on the MR-8mkII side panel using a
USB cable, as shown below (a USB cable is not supplied with the MR-8mkII).
#####001.wav
Song
#####002.wav
#####003.wav
#####008.wav
2 MIX
*********.wav
On the MR-8mkII, a stereo WAV file converted from track
7/8 data is stored to the "2 MIX" folder in the Song folder of
the original song (see the illustration on the left).
Only stereo WAV files in the "2 MIX" folder can be burned
to a CD-R/RW disc in the CD-DA format.
Therefore, you must load the song in which the desired
stereo WAV file(s) is/are stored.
Before creating an audio CD, read the <Note> on the next
page.
USB cable
[USB HOST] port
USB 1.1A type standard
compatible
CD-R/RW drive
CD-R/RW disc
AC outlet
Song01
2 MIX
Song01
2 MIX
Song02
2 MIX
Song03
2 MIX