Fostex MR-8MKII, Owner'S Manual

Page: 111 / 154

111
MR-8mkII Owner’s Manual (Part data editing)
You can move the desired part(s) of the desired track(s) to the other desired track(s).
The part move operation can be made only within the current song. After the part move opera-
tion is carried out, the source part(s) becomes silent.
<Note>: You cannot move data of a song protected.
Release the protection before moving data.
TRK 1
TRK 2
TRK 3
TRK 4
TRK 5
TRK 6
TRK 7
TRK 8
LOCATE A
point
LOCATE B
point
1) Load the song you want to edit.
2) Set the LOCATE A and LOCATE B points (see
page 51).
You can check the part(s) by playing back
between the LOCATE A and LOCATE B points
(see page 46).
3) While the recorder is stopped, press the
[MENU/ENTER] key to enter the menu mode.
The display now shows the first page of the
menu selection screen, where "<< Back" is
highlighted initially (selecting "<< Back"
returns to the previous screen).
4) Rotate the JOG dial to select "Part Edit >", and
press the [MENU/ENTER] key.
The display now shows the part edit menu
screen, where "<< Back" is highlighted.
5) Rotate the JOG dial to select "Move Part >", and
press the [MENU/ENTER] key.
The display now shows the screen for
selecting the source track(s) and destination
track(s) of the move operation.
Initially, "<<Back" is highlighted.
6) Rotate the JOG dial to select "Source Track = *",
and press the [MENU/ENTER] key.
You can now select the move source track(s)
by rotating the JOG dial.
The available options are:
• 1 through 8 (mono track)
• 1/2, 3/4, 5/6 and 7/8 (stereo tracks)
7) Rotate the JOG dial to select the move source
track(s), and press the [MENU/ENTER] key.
You can now select the move destination
track(s) by rotating the JOG dial.
The available options are:
• 1 through 8 (mono track)
• 1/2, 3/4, 5/6 and 7/8 (stereo tracks)
Moving the part(s)
<Note>:
You cannot select the same track(s)
for the move source and destination.
flashing