31
FORTRESSACCENTS INSTALLATION: PLUG AND PLAY
CARE & MAINTENANCE
Care And Maintenance of Fortress Building Products
Powder-Coated Products and Surfaces:
•
Immediately after installation of your Fortress Building
Products, clean powder-coated products and surfaces
with a solution of warm water and non-abrasive, pH
neutral detergent solution. Surfaces should be thoroughly
rinsed after cleaning to remove all residues. All surfaces
should be cleaned using a soft cloth or sponge.
•
Ensure construction materials such as concrete, plaster,
and paint splashes are removed immediately before they
have a chance to dry. Failure to remove these materials
may cause damage to the powder-coated surfaces.
•
The frequency of cleaning depends in part on the standard
of appearance and also the requirements to remove
deposits that may cause damage to the powder coating
after prolonged exposure. Fortress recommends
cleaning in three to four monthly intervals all products and
powder-coated surfaces. In areas where higher traffic,
increased atmospheric substances, or other effects may
occur, the time period between cleanings should be
increased to monthly intervals.
•
WARNING: Do not use strong solvents such as thinners,
or solutions containing chlorinated hydrocarbons, esters,
or ketones. Abrasive cleaners or cutting compounds
should not be used.
WARRANTY
To obtain and review a copy of the warranty, please go to:
https://Fortressbp.com/warranties.
You can also contact:
(844) 909-1999 or write to: Fortress Building Products Warranty,
1720 N 1st St, Garland, TX 75040 to obtain a copy of the warranty.
