12
FORTRESSACCENTS INSTALLATION: PLUG AND PLAY
Fig. 14
Fig. 15
Section View
Feed Wire &
Fish Tape
upwards
through post
Tape Wire
& Fish Tape
together
Step 1:
Dis-assemble Flat Pyramid Cap
1.
Remove the 4 machine screws, located at each corner. As
shown in Fig. 16.
2. Remove the Post Cap and Insect Screen.
DO NOT
discard
the screws.
Note:
• The following components are included with the
FortressAccents Flat Pyramid Caps: Post Cap, Post Cap
Base,
Insect Screen
, 4 - Machine Screws, 4 - Hex Head
Set Screws, and a 2.5mm Hex Wrench.
INSTALLATION (METAL POST): FLAT PYRAMID CAP - NO LIGHTS
(2” [51mm] & 3” [76mm])
Fig. 16
Step 2:
Mount Post Cap Base
1. Mount the Post Cap Base onto the post
.
2. Using the supplied 2.5mm Allen Wrench, tighten the four
set screws. As shown in Fig. 17.
3. Adjust the screws to center and level the Post Cap on the
post.
Post Cap
Insect Screen
