21
FORTRESSACCENTS INSTALLATION: PLUG AND PLAY
Fig. 39
FA - PNP
Female-Female
Connector
Step 4:
Install LED Surface Mount Light
1.
Feed excess wires through the 1” [25mm] hole then insert
LED Surface Mount Light into hole. As shown in Fig. 40.
2. Turn on the Smart Controller (if applicable) to turn on the
lights and verify that the wiring is correct.
3.
Using a rubber mallet tap the light into the hole until the
LED Surface Mount Light flange is flush with the deck
surface.
Tip:
• If using Smart Controller, reference pages 27 - 30
for Tuya
Smart app pairing process.
• If not using Smart Controller, lights can be turned on by
plugging transformer plug into GFCI Outlet.
Fig. 40
