20
FORTRESSACCENTS INSTALLATION: PLUG AND PLAY
INSTALLATION (METAL POST): LED SURFACE MOUNT LIGHT
Step 1:
Mark Desired LED Surface Mount Light location
1. Place the LED Surface Mount Light in the desired location.
2. Using a pencil, mark the center point. As shown in Fig. 37.
Fig. 37
Step 2:
Drill LED Surface Mount Light Hole
1. Using a Forstner Bit,
drill a 1” [25mm] hole on the
previously marked center point. As shown in Fig. 38.
Fig. 38
Step 3:
Connect Light Wire To LED Surface Mount Light Wire
1. Connect wires by using a FA - PNP Female-To-Female
Connector. As shown in Fig. 39. Wire connections can
also be made below the deck surface.
