17
FORTRESSACCENTS INSTALLATION: PLUG AND PLAY
Step 3:
Test Fit LED Glow Ring
2. Bottom edge of LED Glow Ring lens will sit flat on the top
edge of Post Cap Base. If there is a gap, adjust the screws
to allow for proper fit of LED Glow Ring lens.
Protect edges
of LED Glow Ring lens from scratching during installation.
Fig. 30
Step 4:
Install Post Cap
1.
Before installing the post cap, recheck the fit of the LED
Glow Ring on to the Post Cap Base.
2. Turn on the Smart Controller (if applicable) to turn on the
lights and verify that the wiring is correct.
3. Align the Post Cap screw bosses with the holes located at
each corner of the LED Glow Ring.
4. Install the Post Cap Cover with the fasteners provided with
the LED Glow Ring. As shown in Fig. 31.
Tip:
• If using Smart Controller, reference pages 27 - 30 for Tuya
Smart app pairing process.
• If not using Smart Controller, lights can be turned on by
plugging transformer plug into GFCI Outlet.
Fig. 31
