FORTEZA JSC FORTEZA FMC 24 Pro (100m, 200m, 300m)
Please visit our internet sites:
1.4.4. The alarms reception and indication are performed with the security system
controlled by the relay contacts, and with the security systems operating with RS-485
interface. When an alarm is generated, the normally closed contacts are broken.
1.4.5. The operation of the sensor can be adjusted and controlled by connecting to the
sensor via Android device using the receivers integrated Bluetooth and USB interfaces, or
the RS-485 interface (white and green wires).
1.5. Sensor structure
1.5.1. The detector consists of separate units (Rx, Tx) placed in dust-, splash-proof
enclosures.
1.5.2 There are openings on the two vertical surfaces of the housing for mounting
brackets. The brackets can be mounted on the right and left side depending on the need. The
FMC 24 Pro comes with plug-in screws that prevent housing from moisture.
1.5.3.
Tx construction and its bracket are the same as the Rx construction (see fig.
1.2). The difference is in internal elements: under cover
6 are shown in fig. 1.3 (b); six wires
cables are used instead of cable 8.
1.5.4.
Mounting kit includes two brackets and four buckles for the mounting on the
support of Rx and Tx.
1.5.5 The design of the holder allows the sensor to be mounted on a support (diameter
from 40 to 100 mm.) using the included metal clamps. Using brackets from delivery set, it is
possible to mount sensors on a flat surfaces (walls, fence). For mounting the brackets above
the roof and fence, it is advisable to use brackets with protrusions of 250 - 500 mm (not
included in the delivery set of FMC 24 Pro).
