fortessa DIGI-2, Technical Manual

Page: 26 / 80

TM 24
To use the lower-case
characters of the keys,
press
SHIFT.
To cancel the character
on th left press
<.
To enter special
characters, press
the combination
of keys described below:
NAME-> + A = Å
NAME -> + B = Ä
NAME -> + C = ß
NAME -> + O = Ö
NAME -> + P = Ø
NAME -> + Q = Ü
Press
ESC to cancel the
user name entry operation.
ON DISPLAY DESCRIPTION OPERATION
ENTER
NEW TENANT
Followed by:
———————
ENTER NAME
BIANCHINI
ENTER NAME
Press the NAME
➞
KEY
of FT1230.
Enter the user name
to be inserted.
(EXAMPLE: BIANCHINI )
5) MANAGEMENT OF THE USER LIST
5A) ENTERING A NAME BY MEANS OF FT1230
During this phase,
only the numerical
characters are
enabled and it is not
therefore necessary
to enter the
SHIFT key;
enter the < key
to cancel figures to the left.
The newly inserted
name is already
associated with
a different code from
the one to be memorised;
the name is not inserted.
It is possible to proceed to
enter other users.
BIANCHINI
ENTER CODE _
BIANCHINI ENTER
CODE 15
STORING…
Or:
NAME ALREADY
IN MEMORY
Followed by:
———————
ENTER NAME
SELECT NAME
BY
Press the ENTER key
of FT1230.
Enter the user name.
(EXAMPLE: 15 )
Press the ENTER
key of FT1230
to store the user name
and code, the
ESC key to
cancel the operation.
4C) DISPLAYING THE NUMBER OF USERS ENTERED AND THE SOFTWARE
VERSION INSTALLED
INITIAL CONDITION
Module FT3072/A
supplied with terminal
PR connected
to terminal - . The module is in the
programming stage:
▲
or
▼
to scroll the menus
to select the menu
to pass to the lower
level menu.
MAIN
SETTINGS
↓
The software version
installed in module FT3072/A
is displayed on the first line.
The number of users entered
in the memory is displayed
on the second line.
ON DISPLAY DESCRIPTION OPERATION
FT3072/A REV 2.2
NAMES :100
Select the INFO menu
by means of the
key.
After the modification
has been made, remove the
connections between PR and
– on the FT3072/A terminal.
INITIAL CONDITION
Module supplied. LANGUAGE
VALUE: 01
↑ ↓
4B) SETTING THE LANGUAGE
The value of this parameter is used to set the language for the messages.
If it is the first time module FT3072/A has been turned on, you must proceed as
described below:
The DEFAULT item sets
the messages in ITALIAN.
The next time the module
is turned on, selection
of the language is
requested again.
ON DISPLAY DESCRIPTION OPERATION
LANGUAGE
VALUE: 02
PARAMETER
CHANGED
↑ ↓
Enter the value of the
parameter.
EXAMPLE : 02 if you want
to set the ENGLISH
Press the
key
to cancel the operation.
To modify the value
use the
▲
or
▼
keys.
Press the key
to confirm the value
of the parameter.
To modify the value of the parameter, if the value set is not DEFAULT:
INITIAL CONDITION
Module FT3072/A
supplied with terminal
PR connected to terminal -. The module is in the
programming stage:
▲
or
▼
to scroll the menus
to select the menu
to pass to the lower
level menu.
MAIN
SETTINGS
↓
If the entry has been made
correctly.
If the parameter does not
come within the foreseen limits.
LANGUAGE
VALUE: 01
LANGUAGE
VALUE: 03
PARAMÈTRE
MODIFIÉ
Or:
WRONG
ENTRY
↑ ↓
↑ ↓
Select the MAIN SETTINGS/
LANGUAGE menu.
Modify the value
using the
▲
or
▼
keys.
Press the key
to confirm the value
of the parameter.
After the modification
has been made,
Remove the connections
between PR and – on the
FT3072/A terminal.