fortessa DIGI-2, Technical Manual

Page: 15 / 80

TM
13 TM
6G) DISPLAYING THE NUMBER OF NAMES ENTERED IN THE DIRECTORY, THE
SOFTWARE VERSION INSTALLED AND THE ID CODE
Select the INFO menu.
Access to the configuration
stage has been carried out
(see point 2).
Comelit
REV. 2.4
NAMES STORED: 00
ADDRESS RS485 255
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
ON DISPLAY DESCRIPTION OPERATION
7 MODIFYING THE SYSTEM PARAMETERS
7A) SETTING THE PORTER FT1602-FT4660 PARAMETERS
(door opening time, conversation time and reset wait time.
The time which passes between closing down a communication and the possibility of
being able to start another is meant by reset wait time).
Press to select the
SETTINGS / SYSTEM
PARAMETERS / SPEAKER
PARAMETER menu
Select the parameter to
be modified. EXAMPLE:
AUDIO TIMING.
Modify the parameter value
by means of the
▲▼
keys,
press the key to
cancel the operation
.
Press the key to
confirm the value
Access to the configuration
stage has been carried out
(see point 2).
Module FT1602 / FT4660
powered up with PR terminal
connected to terminal -.
The module is in the
programming mode
ENTER AUDIO TIMING
ENT. DOOR LOCK TIME
ENTER RESET TIME
ENTER AUDIO TIMING
ENT. DOOR LOCK TIME
ENTER RESET TIME
VALUE IN SECS. 010
PARAMETER
CHANGED
Admissible values.
Conversation time from 10 to
180 sec. Door opening time:
from 1 to 99 sec. Reset wait
time: from 0 to 10 sec.
A confirmation tone will
be heard on porter module
FT1602/FT4660.
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
ON DISPLAY DESCRIPTION OPERATION
7B) DISPLAYING THE PORTER FT1602 – FT4660 PARAMETERS
(door opening time, conversation time and reset wait time).
Select the SETTINGS /
SYSTEM PARAMETERS /
SPEAKER PARAMETER/
VIEWING menu.
Access to the configuration
stage has been carried out.
(see point 2).
Module FT1602 / FT4660
powered up with PR terminal
connected to terminal - .
DOOR LOCK TIME 01
AUDIO TIMING
010
WAITING TIME 10
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
The parameters set on the
porter FT1602/FT4660
module are displayed.
CAUTION: The function is
only guaranteed
with porter modules
which have a software
version of 2.0 or later.
ON DISPLAY DESCRIPTION OPERATION
7C) SETTING THE ID CODE ( Default = 0 )
The ID code is only used in special applications.
Access to the configuration
stage has been carried out
(see point 2).
Select the
SETTINGS / SYSTEM
PARAMETERS /
ADDRESS RS485 menu
The ID code displayed is
not the one configured.
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
ADDRESS RS485 : 01
ON DISPLAY DESCRIPTION OPERATION
Press the key to
confirm the selection.
Use the
▲▼
keys
to modify the value
of the ID code
Press the key to store
the value.
ADDRESS RS485 : 01
ADDRESS RS485 : 254
PARAMETER
CHANGED
The ID code displayed
is not the one configured.
The code can have a value
from 1 to 255.
Access to the configuration
stage has been carried out
(see point 2).
Select the SETTINGS /
TYPE OF DOWNLOAD
menu
Select the download mode
using the
▲▼
keys.
EXAMPLE: RS485
Press the key to
confirm the selection.
The DEFAULT setting
is RS232.
The mode set is marked by
an asterisk on the left side.
An asterisk will appear on
the left side of the item
selected.
ON DISPLAY DESCRIPTION OPERATION
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
TYPE OF DOWNLOAD
*RS232
RS485
TYPE OF DOWNLOAD
*RS232
RS485
TYPE OF DOWNLOAD
RS232
* RS485
8) SETTING THE TYPE OF CONNECTION WITH THE PC,
RS232 or RS485 (Default = RS232)