fortessa DIGI-2, Technical Manual

Page: 25 / 80

TM
23 TM
ON DISPLAY DESCRIPTION OPERATION
After the modification
has been made, remove
the connections between
PR and – on the
FT3072/A, FT3262
and FT3268 terminals.
INITIAL CONDITION
4) SETTINGS
4A) SYSTEM PARAMETERS
4A-1) MODIFYING THE CONVERSATION, DOOR-OPENING AND PORTER MODULE
RESET TIME PARAMETERS
This operation allows the conversation, door-opening relay closing and reset wait times
of the porter module to be modified.
Module FT3072/A
supplied with terminal
PR connected to terminal -.
Porter module FT3262/
FT3268 supplied
with terminal PR
connected to terminal -.
MAIN
SETTINGS
↓
The module is in the
programming stage:
▲
or
▼
to scroll the menus
to select the menu
to pass to the lower
level menu.
The porter module is in the
programming stage.
It is possible to modify
the conversation time,
the door-opening relay
activation time and the
reset wait time.
Continual pressure on
the
▲
or
▼
key increases
or decreases the value
by steps of 10.
If the entry has been made
correctly.
ON DISPLAY DESCRIPTION OPERATION
Select by means of the
▲
or
▼
keys the
MAIN SETTINGS /
SYSTEM PARAM /
SPEAKER PARAM. menu.
Scroll the menu items
by means of the
▲
or
▼
keys and select the one
regarding the parameter
to be modified.
EXAMPLE: Modifying the
conversation time.
Enter the desired value
using the
▲
or
▼
keys.
EXAMPLE: 100
Press the key to confirm
the parameter value.
After the modification has
been made, remove the
connections between
PR and – on the FT3072/A
FT3262 and FT3268
terminals.
SPEAKER PARAM.
ENTER t AUDIO
ENTER t AUDIO
VALUE: _ _ _
ENTER t AUDIO
VALUE: 100
PARAMETER
CHANGED
↑ ↓
↑ ↓
↓
INITIAL CONDITION
4A-2) DISPLAYING THE CONVERSATION, DOOR-OPENING AND PORTER
MODULE RESET TIME PARAMETERS
This operation allows the values of the conversation, door-opening relay closure and
reset wait time values set in the porter module to be displayed.
Module FT3072/A
supplied wih terminal
PR connected
to terminal -.
Porter module FT3262/
FT3268 supplied
with terminal PR
connected to terminal -.
The module is in the
programming stage:
▲
or
▼
to scroll the menus
to select the menu
to pass to the lower
level menu.
The module is in the
programming stage.
MAIN
SETTINGS
↓
AUDIO TIMING
VALUE: 100
↑ ↓
After 3 seconds, the values
of the other parameters are
displayed in sequence.
ON DISPLAY DESCRIPTION OPERATION
Select the
MAIN SETTINGS /
SYSTEM PARAM. /
SPEAKER PARAM. /
VIEWING menu.
If the entry has been made
correctly.
ON DISPLAY DESCRIPTION OPERATION
Select the
MAIN SETTINGS/
SYSTEM PARAM. /
DOWNLOAD TYPE menu.
Enter the desired value
using the
▲
or
▼
keys.
EXAMPLE: 1
Press the key to confirm
the parameter value.
After the modification
has been made,
remove the connections
between PR and – on the
FT3072/A terminal.
INITIAL CONDITION
4A-3) TYPE OF SERIAL DOWNLOAD
The parameter sets the type of connection used to download the user list.
An RS232 or RS485 interface is available.
Module FT3072/A
supplied with terminal
PR connected
to terminal -. The module is in the
programming stage:
▲
or
▼
to scroll the menus
to select the menu
to pass to the lower
level menu.
MAIN
SETTINGS
↓
DOWNLOAD TYPE
VALUE: 0
DOWNLOAD TYPE
VALUE: 1
PARAMETER
CHANGED
↑ ↓
↑ ↓
4A-4) RS485 ADDRESS
The value of this parameter is only used in special applications.
INITIAL CONDITION
Module FT3072/A
supplied with terminal
PR connected
to terminal -. The module is in the
programming stage:
▲
or
▼
to scroll the menus
to select the menu
to pass to the lower
level menu.
If the entry has been made
correctly.
If the parameter does not
come within the foreseen limits.
ON DISPLAY DESCRIPTION OPERATION
ADDRESS RS485
VALUE: _ _ _
ADDRESS RS485
VALUE: 100
PARAMETER
CHANGED
Or:
WRONG
ENTRY
↑ ↓
↑ ↓
Select the
MAIN SETTINGS /
SYSTEM PARAM. /
ADDRESS RS485 menu.
Enter the desired value
using the
▲
or
▼
.
EXAMPLE: 100.
Press the key to confirm
the parameter value.
After the modification has
been made, remove the
connections between PR
and – on the FT3072/A
terminal.
MAIN
SETTINGS
↓