fortessa DIGI-2, Technical Manual

Page: 13 / 80

TM
11 TM
Electronic name directory module FT3342
INTRODUCTION
The electronic name directory module FT3342 can be used in audio and video
settings, is fitted with a name directory to store a list of user names.
The main characteristics are as follows:
• Memory capacity: 400 names of 18 alphanumerical characters.
• Graphic display with 128x64 dots/pitch resolution.
• 2 call management modes : Standard or indirect code .
• Entering the name list ( Download ) by means of programmer FT1230 or by means
of connection with a PC fitted with software FT1249/A.
• Entering the names by means of connection with the PC can be done over an
RS232 line or over an RS485 line by means of the interface card FT1319.
• Reading ( Upload ) of the name list stored in the directory module by means of
connection with a PC fitted with software FT1249/A.
• Possibility of displaying the graphic interface messages in one of the 9 languages
available.
1) KEY FUNCTIONS
CALL – SELECT MENU
BACK: Scrolls the user list in
decreasing alphabetical order
FORWARD: Scrolls the user list
in increasing alphabetical order.
SEARCH FOR NAME - EXIT MENU
INITIAL CONDITION
3) SETTING THE LANGUAGE
3A) THE FIRST TIME THE MODULE IS TURNED ON, THE LANGUAGE HAS NOT YET
BEEN SELECTED:
On power up SELECT LANGUAGE:
* ITALIAN
ENGLISH
Scroll the list by means
of the
▲▼
keys.
To select the language
required, press
* ITALIAN
ENGLISH
FRANÇAIS
The DEFAULT item
ets the ITALIAN language.
The next time the module is
turned on, selection
of the language
is requested again.
ON DISPLAY DESCRIPTION OPERATION
TEST DESCRIPTION
4) SELF – DIAGNOSIS
On power up, the apparatus carries out a diagnostic test of the connections to check cor-
rect communication with porter module FT1602/FT4660.
If the word OK appears next to the item, then it has passed the test, otherwise, if the
word FAILED appears it has failed the test. On completion of the Self-Diagnosis mode,
press the
▼
key to put the module in the into its normal mode of operation.
The table summarising the meaning of the single tests is given below:
INIZIALIZING
SPEAK. SERIAL
MODE
Check the EEPROM which contains the user name list.
If the test fails, the module is faulty.
If the test fails, check correct serial connection
with porter module FT1602 / FT4660 .
Check presence of the alphanumerical keypad
which makes up FT3340. Since it is not provided for
FT3342, the wording FT3342 must appear.
INITIAL CONDITION
5) USING THE NAME DIRECTORY
5A) SCROLLING AND CALLING THE USER SELECTED
During normal operation. SCROLL NAMES
SEARCH NAME
Scroll the list by means
of the
▲▼
keys.
To exit, press
the key
Press the key
to call the selected user.
ROSSI GIOVANNI The names are entered
in alphabetical order.
The call has been made
correctly.
The call has not been
made correctly.
The system is engaged.
ON DISPLAY DESCRIPTION OPERATION
CALL EFFECTED
Or:
USER NOT
AVAILABLE
Or:
USER BUSY
INITIAL CONDITION
5B) SEARCHING FOR A NAME IN THE DIRECTORY
Press the key.
During normal operation.
SEARCH THE NAME
BY ENTERING
INITIAL
And then:
SELECT INITIAL:
A B C D E F G …
ON DISPLAY DESCRIPTION OPERATION
SCROLL NAMES
SEARCH NAME
2) ACCESSING THE CONFIGURATION STAGE
Powered up with PR
terminal connected
to terminal - The module is in
programming mode:
to select the menu
▲▼
to scroll the menus
to return to the
previous menu
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
ON DISPLAY DESCRIPTION OPERATION
3B) CHANGING THE LANGUAGE SET PREVIOUSLY:
Access to the configuration
stage has been carried out
(see point 2) NAME DIRECTORY
ACCESS CONTROL
SETTINGS
SELECT LANGUAGE:
* ITALIANO
ENGLISH
SELECT LANGUAGE:
ITALIANO
*ENGLISH
The default language
on power up is Italian.
The language
set is marked by
an asterisk on the left-hand
side. When repowered
the language resets
to Italian by default.
Select the SETTINGS /
SELECT LANGUAGE
menu
Scroll the list by means
of the
▲▼
keys.
To select the language
required, press
ON DISPLAY DESCRIPTION OPERATION