Forno Bravo
139
Ver. 2.0
©Forno Bravo, LLC 2016. All Rights Reserved.
3/4" Floor to top of burner housing
*(Minimum)
1-1/2" Floor to top of ignitor
*(Minimum)
Drago P1 Plus Burner unit
2" Firebrick tiles
1/8" - 3/8" Mortar, sairset, or
#60 sand used for leveling floor
3" Ceramic board floor insulation
1-5/8" Concrete hearth
with rebar
1/2" Backer board
Forno Bravo Premio2G 120G Pizza Oven
and Cucina 130G Modular Pizza Oven Stand
Detailed view of burner placement
SCALE 1:4
For more information: www.fornobravo.com
Specifications:
Cucina stand, concrete CMU stand, or equivalent non-combustible structure's front opening requires a minimum of 19-3/4"W x 19-3/4"H for air flow to burner assembly
Gas line should be 1/2" pipe then reduced to 3/8" union
Liquid Propane line pressure 10 to 12 WC Natural Gas line pressure 5 to 10 WC
Factory settings: Natural Gas - 2.75 orifice, air shutter at #2 position Liquid Propane - 2.25 orifice, air shutter at #3 position
WARNING: DO NOT CHANGE FACTORY SETTINGS WITHOUT CONSULTING MANU
FACTURER
OR CERTIFIED TECHNICIAN.
WARNING: READ ALL INSTRUCTIONS IN INSTALLATION MANUAL BEFORE IN
STALLING AND
USING APPLIANCE. FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN PROPERTY DAMAGE, BODILY INJURY OR EVEN DEATH.
Installation guide: www.fornobravo.com/PDF/residential_install.
UL approved settings for gas orifices
NG
LP
Input rate w/ 2.5 orifice and air shutter at #2 setting (Btu/hr
)
32000
Input rate w/ 2.7 orifice and air shutter at #2 setting (Btu/hr
)
38000
Input rate w/ 1.75 orifice and air shutter at #3 setting (Btu/h
r)
32000
Input rate w/ 2.0 orifice and air shutter at #3 setting (Btu/hr
)
43000
Input rate w/ 2.25 orifice and air shutter at #3 setting (Btu/h
r)
51000
Input rate w/ 2.5 orifice and air shutter at #4 setting (Btu/hr
)
46000
Made in the U.S.A.
Residential Gas Fired Pizza Oven
1
2
3
4
Revision
Sheet: of
6/13/2016
2
7
Architect Drawings
Gas Burner Detailed View
Premio2G 120G
5
