Installation and
Operating Manual
Forno Bravo
Casa2G and Premio2G
Residential Modular Refractory Ovens
23
©Forno Bravo, LLC 2019. All Rights Reserved.
Ver. 2.0
4.1. Set the cooking floor on a thin bed of sand.
4.2. Set the vent landing level with the cooking floor.
5. Dome Assembly
Overview
The dome and vent pieces make up the oven cooking
chamber and ventilation system. The oven rests on
the FB Board insulation and encloses the cooking
floor.
Instructions
Makes sure to dampen the oven pieces with a sponge
before applying the high heat mortar included with
the oven.
Only apply mortar on the outside of the oven
dome pieces, not in between the pieces, otherwise
thermal expansion and contraction will cause the
mortar to crack and fall apart.
Set your oven dome pieces around the oven floor,
taking care to ensure that each piece lies flat on the
insulating hearth and lines up squarely with the other
dome pieces. Push the pieces together BEFORE you
apply the mortar. Each dome piece is designed to have
no less than 1/16" (1.5 mm) gap and no more than 1/2"
(12.7 cm) gap between joint fittings with 1/4" (6.3 mm)
being ideal.
5.1. Line up the dome pieces.
