Manual - Formech 450DT V1.0 - 0317
7
Introduction and Initial Assembly
Your Formech Machine is supplied with:
1x Electrical cable
1x Installation / Operating
/ Repair EC
Certifi cate
1x Table Mesh
Transportation / Positioning
The 450DT is delivered in a dedicated packaging which includes a pallet, a cardboard box and protective
foams. The machine may be unpacked and placed on a bench, table or 450DT trolley. Ensure that the
structure, size and load bearing capacity of the bench or table is suffi cient for the machine weight. A
minimum of 2 persons are required to lift the machine. In the case of the 450DT trolley, ensure that the 2
machine retaining screws are fi tted to the under-side of the trolley / machine.
Ensure the machine and / or trolley is sited on a level surface in a draft free environment with a minimum
of 40cm access around the machine. Ensure that the area on and around the machine is clear of all other
stored items and materials. More access may be required for maintenance and this desktop machine may
be easily moved if necessary.
Noise Emissions
Noise emissions on the Formech 450DT are less than 70dB(A).
Machine Storage
The Formech 450DT must be stored in a dry environment. If the machine is not used for a long period of
time, run the pump periodically (once a month).
...
Installation, Operating and Service Manual
Desktop Vacuum
Forming Machine
450DT
For Parts, Service & Technical Assistance
Telephone: +44 (0) 1582 496 797
Fax: +44 (0) 1582 496 646
Assortment of 5
plastic sheets
(content may vary)
