Manual - Formech 450DT V1.0 - 0317
18
1. Service kit
2. Reducing windows
3. Blow mould windows
4. 450DT Machine trolley
The following items can be purchased for your 450DT vacuum forming machine:
1. It is unlikely that you will need to service or repair your machine for many years provided you follow
the maintenance information contained in this manual; however the table and clamp seals, which are
considered to be consumable items, will need to be replaced depending on the usage of the machine.
Therefore this kit contains the essential consumables (seals and pump fi lter) to ensure a good performance
of your machine year on year.
2. The standard aperture size of the Formech 450DT reducing window is 228mm x 203mm, to use plastic
size of 248mm x 223mm. Formech can also produce special size reducing windows. For more information
please contact our sales department.
3. You can use your vacuum forming machine for blow moulding by fi tting a special circular reducing window
to your machine. The maximum diameter you will get on the 450DT is 270mm. For more information please
contact our sales department.
4. The Formech machine trolley allows you to easily move your 450DT machine. The 2 locking castors assure
the trolley remains in position all the time. Underneath there is also space to store plastic material and
moulds. The trolley dimensions are: - Height: 720mm - Depth: 780mm - Width: 608mm
5. This is an essential selection of core consumable parts to minimise down time within the fi rst two years.
Spare parts kit contains: 1x Quartz element FSQ 250W, 1x Quartz element FSQ 300W, 1x Quartz element
SSQ 550W, 2x Ceramic terminal blocks, 2x Clamp adjuster nuts, 2x Toggle clamps, 2x Clamp frame grips, 1x
Seal kit, 1x In-line fi lter, 1x 13amp fuse.
5. Spare parts kit
Optional Extras and Accessories
