_________________________________________________________________________
68
4
Maintaining Your Machine
CAUTION:
Never attempt any maintenance that is not specifically described in this documentation. Please
contact your
Formax
Dealer for authorized servicing.
Recommended Weekly Operator Maintenance
To maintain the accuracy and reliability of this machine it is
recommended to carry out the following maintenance on a
weekly basis:
1. Power off the machine using the main power switch.
Remove any remaining paper from the feeder table.
2. Wipe down the feeder table and other paper path
surfaces.
3. Check feeder separator pads for damage or wear.
4. Clean vacuum belts and paper feed rollers from any
paper or toner dust using the supplied roller cleaning
brush [A].
5. Remove the rotary tool carrier to clean its rollers.
6. Remove and clean the creasing blade.
NOTE:
For instructions on how to remove the creasing blade, see the “Replacing Blade Sets”
section within this manual.
7. Clean all sensors using the supplied sensor cleaning brush [B] (see next page).
o
Table empty sensor Q11 [C]
o
Separated paper (SP) sensor Q12 [D]
o
Top down paper sensor Q4 [E]
o
Creaser input sensor Q20 [F]
o
Creaser home sensor(s) Q22 (Q21) [G]
o
Creaser output sensor Q25 [H]
A
B