_________________________________________________________________________
60
3
7. If the crease is skew, adjustment is necessary.
NOTE:
Wrong crease positions are marked in red, correct crease position is marked in green.
8. To adjust crease skew, loosen the crease adjustment knob by rotating it
counterclockwise.
9. Move the knob slightly, either to the left or to the right depending on the direction of
the crease skew.
10. Rotate the knob clockwise to secure it.
11. Run another proof sheet to check if the crease is now perpendicular to sheet edge.
Repeat steps 6 to 10 if necessary.
Feed direction
Crease