_________________________________________________________________________
30
1
13. Loosen locking knob G by rotating it counterclockwise.
14. Use the adjustment wheel H to set paper registration wall angle. If the sheet skews
inboard away from the operator (L1 > L2) turn the wheel down. If the sheet skews
outboard towards the operator (L1 < L2) turn the wheel up.
15. Lock the adjustment by rotating knob G clockwise.
16. Set the sheets on the paper table in the corner and adjust magnetic paper guides if
necessary.
17. Run a proof sheet and inspect the output. If further adjustment is necessary, repeat
steps 13 to 16.
NOTE:
When not in use, the rotary perforation can be disengaged by sliding either the blade or the
anvil to one side so that there is at least a 5 mm (0.2”) gap between them. However, it is
recommended to remove the blades and anvils completely to avoid unwanted marking on
delicate media.
For optional perforation blades see “Optional Parts” in this manual.
G
H