
_________________________________________________________________________
58
3
•
Fan the paper stack to ensure sheets are not stuck together and there is no excessive
buildup of static electricity.
CR-208 – Creaser output sensor Q25 blocked
Creaser output sensor Q25 monitors the sheet as it exits the machine. If the sensor is not
uncovered in time, error CR-208 will be displayed. This means either that the sheet has failed
to exit the machine or that the stacker is full.
Actions:
•
Check whether the height adjustable stacker is full. If it is, empty the stacker.
•
Remove the jammed sheet (if any) from the creaser rollers. If the sheet is damaged,
discard it.
•
Check the paper path for any obstructions or debris.
CR-209 – Clean creaser input sensor Q20
Creaser input sensor Q20 automatically calibrates every time the machine cycle is started. If
the sensor cannot successfully complete its calibration routine, error CR-209 will be displayed.
Actions:
•
Clean sensor Q20 using the sensor cleaning brush.
•
If the problem persists, contact service.
NOTE:
See the “Maintaining Your Machine” section of this manual for instructions on how to clean
this sensor.