_________________________________________________________________________
43
2
Custom Job
To fully customize the number and position of creases on the sheet set up a custom job:
1. Click the Pattern button
on the Home screen
NOTE:
Choosing a new pattern will
reset any fine adjustments
that may have been entered
on other screens.
2. Select Custom job.
NOTE:
The custom job will be based
on the previously selected
pre-set.
•
Use the Disable button to temporarily suspend the
selected crease without deleting it (for example, when
programming jobs in two passes)
•
The Invert button disables all currently enabled creases
and enables all currently disabled creases. Use this
when running jobs in two passes.
3. Custom job screen:
•
Click Add crease to add
more creases to the list.
•
Select a crease and use
the + / - buttons to adjust
its position.
•
Use the Delete button to
remove the selected
crease from the list.
•
The Swap creaser
button can be used to
select whether the 1
st
or
the 2
nd
creaser will be
used to make this crease
(only available if the
optional creaser unit has
been installed).
•
Use the Proof button to
test run a single sheet.
•
When satisfied, click the
green tick mark.