APPLYING DPC TO YOUR BASE
Start to unwrap the DPC roll and choose a starting
point on the base’s outer face. Ensure it covers half
of the bearers and staple into place.
Once fully wrapped around the base, overlap the
starting point and staple into place.
21
21
23
23
19
19
20
20
Using a Stanley knife, cut the DPC at the corner to
create 2 pieces to easily fold onto the OSB sheets
and staple into place.
Continue folding the overhang and corners of DPC
onto the OSB sheets as you make your way around
and staple into place.
The final result is shown above.
Continue to wrap around the base. We suggest
one person unwraps while the other follows
behind stapling the DPC into place.
a
22
22
24
24
8
