WALL PANELS
Install the Window Panel (N1) as shown above,
leaving the provided space for the window insert.
This is labelled on the layout.
45
45
Position the screw roughly 45mm from the outer
edge. Pre-drill and screw through the front into
the side wall panel using 3 x 150mm screws (top,
middle and bottom).
47
47
Slide and knock into place.
51
51
Use 35mm screws to secure the window insert into
place by screwing from both outside and inside of
each wall panel into the window insert. This will
use a total of 8 x 35mm screws.
49
49
Install the Front Panel (O) and butt up against the
front side wall panel installed in the previous step.
Ensure all edges are flush.
46
46
Knock the Window Insert (AA) into the the space
between Window Panel (N) and Window Panel
(N1). Ensure the top is flush.
48
48
Install the other Front Panel (O). Pre-drill and screw
through the front, into the side panel using 3 x
150mm screws (top, middle and bottom).
52
52
Install the last Side Panel 4 (J). Apply expanding
foam into the bottom groove.
50
50
12
