background image

CLEANING & SEALING (WINDOW & DOOR)

Place the ledge onto the silicone. Ensure it is 

level and the back edge meets the first edge of 

the back OSB sheet (the same positioning as the 

window).

159

159

WINDOW GLAZING & DOOR FRAME

Lift and angle the frame, then insert the ledge. 

Butt up against the wall panel.

160

160

Insert the window frame into the left hand side 

of the double doors. The metal cap will slot into 

place.

164

164

Further secure the window with 1 x 112mm screw 

into the top and 1 x 112mm into the bottom.

166

166

(Steps 163, 164, 178 and 179 are only for the 

‘Xtend Plus’ doors and side window. These step 

will not apply to the standard option).

 Use 3 x 

35mm screws to secure the metal capping.

163

163

Check the frame is both level and plumb, then drill 

fixing holes into the frame side. 

161

161

These should be drilled 150mm from the top and 

bottom corners and 300mm from the 150mm 

points with the 112mm screws.

162

162

Drill 150mm from the top and bottom corners and 

300mm from the 150mm points with the 112mm 

screws into the double doors and into the wall 

panel on the opposite side.

165

165

27

Summary of Contents for Xtend 2.5










































Reviews: