WALL PLATES & FIRRINGS
Insert the Front Wall Plate (AL), knocking into
place. Expect this to be tight fitting. Ensure it is
flush to the top and ends.
59
59
Further secure each of the wall plates with 3 x
35mm screws externally and 3 x 35mm internally,
through the side panels into the plate, between
the 125mm screws.
63
63
Use 2 x 125mm screws to secure the thicker end of
the firring component.
65
65
Insert the Side Wall Plate (AK). Pre-drill and secure
with 4 x 125mm screws. Repeat the process for the
other side wall plate and the back wall plate.
62
62
Pre-drill and secure with 4 x 125mm screws.
Repeat the same process for the Back Wall Plate
(AL).
60
60
Apply expanding foam to the groove of one of the
side panels.
61
61
Use 2 x 35mm screws to secure the thinner end of
the firring component. Repeat this process for the
other firring.
66
66
Position the Firring (AB) and butt up against the
front panel.
64
64
14
