Fore Systems forerunner series, Configuration Manual

Page: 224 / 352

A - 4
ForeRunner ATM Switch Network Configuration Manual
Configuring SNMP
6 asxPsInputDown This trap alerts that one ATM switch power supply
failed due to failure in the input voltage. The power
supply that failed is identified by the power supply
index. Note that an input voltage may be out of specifi-
cation and may not cause a power supply failure if
high loads are not applied.
7 asxPsInputUp This trap alerts that one ATM switch power supply
that had an AC input failure is up. The power supply
that is back up is identified by the power supply index.
9 asxPsOutputDown This trap alerts that one ATM switch power supply
output or the power supply was physically removed.
The power supply that failed is identified by the
power supply index.
10 asxPsOutputUp This trap alerts that one ATM switch power supply
that had an output failure or was removed is now up.
The power supply that is back up is identified by the
power supply index.
22 asxFanBankDown This trap alerts that one ATM switch fan bank failed.
The fan bank that failed is identified by the fan bank
index.
23 asxFanBankUp This trap alerts that one ATM switch fan bank is up.
The fan bank that is back up is identified by the fan
bank index.
28 asxLinkDown This trap alerts that the link that is identified by
{hwPortBoard, hwPortModule, hwPortNumber} was
configured up but lost its carrier (or the framing bit)
and is currently down.
29 asxLinkUp This trap alerts that the link that is identified by
{hwPortBoard, hwPortModule, hwPortNumber} is
back up.
30 asxSpansDown This trap alerts that the SPANS signalling on the link
that is identified by the sigPathPort and sigPathVPI
failed.
Table A.2 - SNMP Traps Supported on the ForeRunner Switches (Continued)
Trap
Number
Trap Name Description