Fore Systems forerunner series, Configuration Manual, Page: 237 / 352

ForeRunner ATM Switch Network Configuration Manual
A - 17
Confi
guring
SNMP
Configuring SNMP
2000 frf8PVCStatus This trap indicates when an interworking PVC has
experienced an alarmed condition, either on the ATM
network side or Frame Relay side. It is also generated
when the PVC alarmed condition is cleared. It carries
the operational status of the PVC by the
frf8ConnOperStatus, as well as the reason why exiting,
entering, or changing the alarmed state
frf8ConnPVCAlarmReason.
If the interworking PVC changes its status by an
AdminStatus command (active/inactive/testing),
causing the frf8ConnOperStatus to change (up/down),
this trap is generated with frf8ConnPVCAlarmReason
set to no defect. This trap gives the support to manage
defects that might occur in either the Frame Relay net-
work or the ATM network, even if the PVC Opera-
tional Status is already down.
2001 ifLinkDown This trap indicates that the SNMP agent has detected
that the ifOperStatus of this interface is about to transi-
tion into the down state.
2002 ifLinkUp This trap indicates that the SNMP agent has detected
that the ifOperStatus of this interface has transitioned
out of the down state.
2003 framNakMsg This trap is sent when a message from the SCP to the
FramePlus network module does not succeed. The
request that has failed is encoded within the trap as the
messageType
, and the reason for failure is encoded
within the
errorCode
. See Table A.3 for the message
types and the message requests. See Table A.4 for the
error codes and their meanings.
Table A.2 - SNMP Traps Supported on the ForeRunner Switches (Continued)
Trap
Number
Trap Name Description