Fore Systems forerunner series, Configuration Manual

Page: 120 / 352

3 - 34
ForeRunner ATM Switch Network Configuration Manual
Configuring an Emulated LAN
For example, you could specify that telnet traffic to the Class C 202.19.88.0 subnet should be
sent on a UBR VCC with a peak rate of 10,000 cells per second, but only after the traffic on that
connection exceeds 20 frames per second. If the VCC is idle for more than 10 minutes, then the
shortcut should be torn down.
.IP_Flows:0.0.0.0/0 202.19.88.0/24 \
TCP 0 23 \
20/1 1/600 0/1 \
0x0 UBR 10000
The parameters in the IP flow example are defined as follows:
0.0.0.0/0
The source address/prefix length.
202.19.88.0/24
The destination address/prefix length.
TCP 0 23
The protocol to which this flow applies, and the
source and destination ports, respectively.
20/1 1/600 0/1
The set-up threshold, the tear-down threshold, and
the set-up threshold for the default forwarding path,
respectively.
0x0 UBR 10000
The QoS flag (currently unused and should be set to
0), the QoS class, and the PCR for the specified QoS
class, respectively.