manualshive.com logo in svg

FOLSOM ViewMAX, Installation And Operator'S Manual

Share
Download
FOLSOM ViewMAX Installation And Operator'S Manual Download Page 30

 

22   

ViewMAX – High Performance Down Converter 

Manual # 26-6090901-00 / Revision D

 

 
 
 
 
 
 
 
 
When first displayed, the current Genlock State / Mixer mode setting is highlighted. 
 

‰

 

FreeRun indicates that the Genlock source is not used. 

 

‰

 

Genlock indicates that the current source connected to the Genlock input is being used to synchronize the 
output video signal. If no source for Genlocking is available, the output picture will behave erratically. 

 

‰

 

Window indicates that the scaled input video is displayed over the background video source.  See the MxSrc 
menu item description for selecting the background video source and KeyClr for selecting the luma or 
chroma mixing choices. 

 

‰

 

FgKey indicates that the background will be visible on the output NTSC/PAL monitor whenever the 
foreground (input video source) color matches the keying color. 

 

‰

 

BgKey indicates that the foreground video will be visible on the output NTSC/PAL monitor whenever the 
background color matches the keying color. 

 
As the knob is turned, the current Genlock or background-mixing mode is updated and the output video display will 
reflect the changes. Press SEL of ESC to exit the menu and return to the Setup Menu. The last highlighted selection 
will be maintained after SEL or ESC is pressed. 
 
 
Once the main board Genlock is enabled, the Configuration Menu will contain one additional selection to allow 
adjustments of the Genlock Horizontal Phase and Sub Carrier Phase. 

Genlock Horizontal and Sub-Carrier Phase Adjustments 

The following menu is displayed when Genlock is enabled from the Genlock selection menu in the Setup menu.  
 
 
 
 
 
 
 
 

 
 
Genlock Horizontal Phase Adjustment 

The horizontal phase adjustment allows the user to advance or delay the ViewMAX encoded composite signal in 
relation to the Genlock signal. In order to allow for cable or other system delays, ViewMAX output can be adjusted in 
37.037 ns (nanoseconds) steps which corresponds to ½ pixel, between 400 half-pixels of delay and 270 half pixels of 
advance. Delay times are indicated by a negative adjustment value. This function is only available if the Genlock 
source is enabled. Selecting 

Horiz Phase Adj

 will display the following control to adjust the horizontal phase in steps 

of 37ns: 
 

Genlck Src/Mixer Mode

   

FreeRun      GenLock 

 Window    FgKey   BgKey

 

  

Genlock Phase Adj 

     Horiz Phase Adj 

 Subcarrier Phase Adj

 

Summary of Contents for ViewMAX






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands