Manual # 26-6090901-00 / Revision D
ViewMAX – High Performance Down Converter 15
Hue Adjustments (NTSC Only)
Turn the control knob to highlight Hue and then press SEL to select Hue. The following control will be displayed. Turn
the knob to the right to increase or to the left to decrease. The slide bar will change to indicate the current setting and
the output NTSC video will change accordingly. Press SEL to save the setting or ESC to cancel any changes and
return to the Input Level Adjust Menu.
RGB Color Balance (Analog RBG Sources Only)
Selecting
RGBColorBal
by turning the knob to highlight the selection and pressing SEL will display the following
menu used to make fine adjustments to the red, blue, and green brightness and contrast settings or to reset the color
settings to the factory defaults.
Turn the knob to highlight the desired selection and press SEL. A control similar to the following will be displayed to
allow red, blue, or green brightness or contrast to be adjusted in 0.1% increments between minus 10% and +10% of
the current overall brightness or contract setting. As the knob is turned, the slide bar will move to indicate the selected
change. The output NTSC/PAL video monitor will also change accordingly. Press SEL to save the change and return
to the RGB color balance menu or press ESC to cancel any changes.
Reset All
Selecting
ResetAll
will reset all brightness, contrast, hue, and saturation controls to their factory default setting. A
confirmation message will be displayed.
Aspect Ratio Controls
Selecting AspectRat displays the following menu to control aspect ratio selections:
Hue
1%
-
-90 0 90
RGB Color Balance
Bright: Red Blu Grn
Cntrst: Red Blu Grn
Red Brightness
3.2%
-10 0 10
Output Aspect Ratio
Current A/R: 1.333
4:3 16:9 Custom
