Fohhn DLI-230, User Manual

Page: 41 / 68

41
5. Select a setting from both drop-down lists for the “close” ( Switch 1 close ) and “open” ( Switch
1 open ) status: for example, you can deactivate the current status ( Disabled ) or load one of
up to 100 presets ( Load Preset ).
6. Confirm your selection by clicking OK .
When the loudspeaker is switched on, the selected presets will be loaded according to the current
“close” or “open” status of the switching contact.
Before configuring the switching contacts, we recommend that you first save all user presets.
Further information on saving user presets can be found in the FOHHN AUDIO SOFT user manual.
You can download this from the Fohhn website:
www.fohhn.com
3.4.4 Password Lock
LINEA FOCUS DLI-130 and DLI-230 loudspeaker systems (and their parameter settings) can be
password protected (or locked) to prevent any inadvertent changes. This password protection can be
set up in
FOHHN AUDIO SOFT .
Further information on password protection can be found in Chapter 6.6 “Password Lock” of the
FOHHN AUDIO SOFT user manual. You can download this from the Fohhn website:
www.fohhn.com
3.4.5 Tilt Sensor
DLI-130 and DLI-230 systems have a tilt sensor whose data can be read out in FOHHN AUDIO SOFT .
This lets you determine the actual mechanical tilt of the installed loudspeaker systems. Please note
that the tilt sensor has a tolerance of ± 1.0°.
Simply open the Beam Steering view and click on the READ button to the right of the parameter area.
The displayed sensor data can be updated by clicking on the READ button again.
You can transfer these determined tilt values into the Focus Simulation: Simply enter the value in the
Pre-Angle [°] parameter field below.
You can find further information on the Focus Simulation in Chapter 4.2 “Set-up in the Beam
Steering View“.