38
3.4 Further Options
3.4.1 Auto Power Save
LINEA FOCUS
DLI-130
and
DLI-230
systems have a configurable Auto Power Save mode, which
enables energy to be saved and the longevity of the device to be extended. If no audio signal is
received, the integrated CLASS-D amplifiers switch to power saving mode. As soon as an audio signal
is detected, the amplifiers are immediately ready for operation. The amount of time before the
device switches to Auto Power Save can be set as desired – between 1 second and 12 hours. The
mode can also be completely deactivated.
Proceed as follows to set up
Auto Power Save
in
FOHHN AUDIO SOFT
:
1.
Select one or more
LINEA FOCUS
system(s) in the
Device List
, then with a right mouse click
open the context menu.
2.
In here, select the
Options
entry. This will open the
Advanced device settings
configuration
dialog.
3.
In here, select one or more
LINEA FOCUS
system(s), then with a right mouse click open the
context menu.
4.
In here, select the
Set auto power save
entry. This will open the
Set auto power save time
window. (You can also open this window via the corresponding button at the bottom left of
the
Advanced device settings
dialog.)
5.
From the drop-down list (bottom left), select the desired switching time and confirm your
selection by clicking
OK
.
Summary of Contents for DLI-230
