30
With a DLI-130/230 DAN system, all Dante Input Interface parameters (e.g. the audio routing
inside a Dante network) must be configured using the Dante Controller software.
DLI-130/230 DAN Firmware Update
Updating the Dante Firmware in a
DLI-130/230 DAN
requires the
Dante Firmware Update Manager
software. You can download this free of charge from the following URL:
https://www.audinate.com/products/firmware-update-manager
Dante Firmware files have the extension
.dnt
and can be downloaded from here:
https://www.fohhn.net/download/dante/
Example:
Focus_1.0.2.dnt
for Dante devices in the
FOCUS-SERIES.
Perform the update as follows:
1. Start the
Dante Firmware Update Manager
.
2. Select the appropriate network interface and confirm the selection with
Next
.
3. Select
Update Dante Firmware
.
4. Select the appropriate
.dnt
file and confirm the selection with
Next
.
5. Select the listed Dante devices that are to be updated and click on
Start
.
Summary of Contents for DLI-230
