Fogo Montanha Trama, Instruction Manual

Page: 9 / 50

3
3
Fuel
• To operate this unit do not use pellets other than those certified in compliance with the EN14961-2
standard, grade A1.
• We recommend that you use only pellets that are certified in compliance with the EN 14961-2 standard,
grade A1.
Parameters EN plus – A1 Units
Diameter Between 5 and 7 mm
Length 3.15 ≤ W ≤ 30 mm
Density ≥ 600 kg/dm
3
Heating capacity ≥ 5.32 KWh/kg
Mechanical strength ≥ 97.5 % (mass)
Ash ≤ 0.5 % (mass)
Humidity ≤ 10 % (mass)
Sulphur percentage < 0.05 % (mass)
Chlorine percentage < 0.02 % (mass)
Nitrogen percentage < 0.3 % (mass)
Copper ≤ 10 mg/kg
Chromium ≤ 10 mg/kg
Arsenic ≤ 1 mg/kg
Lead ≤ 10 mg/kg
Cadmium ≤ 0.5 mg/kg
Mercury ≤ 0.1 mg/kg
Nickel ≤ 10 mg/kg
Zinc ≤ 100 mg/kg
• The physical and chemical properties of the pellets (namely, calibre, friction, density and chemical
composition) may vary within specific tolerance ranges and across manufacturers. Please note that this
may cause changes to the feeding process and, consequently, the need for different doses (more or less
pellet quantity).
• The unit allows for a ± 25% adjustment to the pellet dosage at start-up and at power levels.
• The CE certification tests that were run used wood pellets l with a heating capacity of 5.4 kWh/kg.