Fogo Montanha Trama, Instruction Manual

Page: 15 / 50

9
7
Installing the pellet burning free standing fire
• The unit is equipped with four adjustable height feet, allowing for simple adjustments of the unit when
placed on uneven floors.
• Remove the instruction manual from the package and hand it over to the client.
• Connect an 80mm diameter pipe between the unit’s combustion gases output and the fume extraction
duct directed to the exterior of the building (e.g. through the chimney) – please check diagrams in section
4.
• Connect the 230V AC power cable to a grounded power socket.
• The side of the unit where the hot air outlet is located must be placed facing the area to be heated.
8
Filling the pellet reservoir
• Open the pellet reservoir's lid located in the top of the unit, as shown in the following figures.
• Empty the pellet bag into the reservoir
• Close the reservoir lid