33
•
Later on this procedure you should remove the micro-joints secured plate at the back of the unit and
replace it the UPS.
•
Finally, perform all the required electrical connections.
•
Never connect the UPS electronic module when the power of the unit is turned on.
27
For your safety we remind you that you should:
•
Make sure you fully read and understand this instruction manual before using the free standing fire as a
biomass heating unit.
•
The free standing fire is not intended for use by children or people physically and/or mentally disabled, or
that are inexperienced or unfamiliar with using of the unit, except under the direct supervision or
instruction of an adult.
•
Do not touch the free standing fire when barefoot or if any part of your body is wet or humid.
•
Do not tamper with the safety devices or adjustment features without the manufacturer's authorization.
•
Do not cover or reduce the size of the vents on the unit.
•
The free standing fire installation has clearance requirements for proper combustion. Rooms with air tight
isolation or the existence of air extraction devices sources in the room may prevent the unit from working
properly.
Summary of Contents for Trama
