Fogo Montanha Trama, Instruction Manual

Page: 33 / 50

27
21
Sleep
• The “Sleep” menu allows you to set the time at which the unit will be turned off
• The technical menu is not available for the end user and included only the factory settings which should
never be changed.
Sleep function Procedure
Go to the sleep menu

Press the menu key until the “sleep” menu appears

Press “set” to activate the programme
Activating the programme stop time





Press “set” again. The display starts to flash
Press the “+” or “-“ key to select the desired time.
Press “ok” to confirm the selection.
Press “esc” twice to exit the “sleep” configuration.

22
- Troubleshooting
Failure Es

Service ( 2100 hours of operation)

Air probe failure

Low pellet level

The door is open

Air temperature probe failure

THE MAINTENANCE FAILURE MESSAGE (“SERVICE” MESSAGE ON THE DISPLAY)
MEANS THAT THE UNIT’s OPERATION HOURS EXCEEDED OVER 2100 HOURS OF
OPERATION. YOU SHOULD PERFORM THE UNIT'S MAINTENANCE FIRST AND
THEN RESTART THE HOUR METER TO CLEAR THE FAILURE MESSAGE. THIS DOES
NOT AFFECT THE NORMAL OPERATION. IT'S ONLY A WARNING.

FAILURES DO NOT CAUSE THE UNIT TO SHUT DOWN.
• In case of an emergency, shut down the unit following the standard procedure to switch the unit off. To
do so, press the off button for a few seconds, until "off" is displayed.