Fogo Montanha Trama, Instruction Manual

Page: 27 / 50

21
18
Timer
The unit includes a timer that allows it to be turned on and off
Timer menu Procedure
Accessing the timer menu



Press the Menu key twice to display the “Data e Hora” (Date
and Time) menu. Press the “+” key until the timer menu is
displayed.
Press “Set” to display the ‘Habilitação (Activation) menu.
Activating the timer mode




Press “Set” again. The display starts to flash.
Press the “+” or “-“ to select “ON” or “OFF”. Press “ok”, to
confirm your selection.
Press the "+" key to go to menu "Reiniciado" (Reset).
Using the reset mode (1*)





Press “Set” again. The display starts to flash. A
confirmation prompt appears.
Press “ok” to confirm your selection (if desired). Press “esc”
to exit the menu.
Press the “+” key to go to menu “Prog. 1 … 6”.
Setting the parameters for Programme
P1…P6 (3*)

Press “Set” again. The display starts to flash

Press the “+” or “-“ to select the desired programme.

Press “set” to confirm the selection

Press the “+” key to access the menu corresponding to the desired programme”.
+
• (1*) This menu allows you to delete any previously selected programme settings.
• (2*) You can set 6 different programmes which you can assign to any day of the week.
• Repeat the same procedure for the remaining programmes, if desired (Programmes P2 to P6).
• Note: After setting up the programmes, do not forget to activate them using the “Habilitação”
(Activation) menu.
• Following are the instructions to set up a programme in the programmable thermostat.