0$676(783
Place the mast onto two supports or padding.
Unroll the trapeze wires and fix them using the 6 mm
bow shackle to the upper hole on the mast tang (two
on each side).
Unroll the shrouds and the forestay wire (with
the jib halyard block) and fix them to the lower
hole of the mast tang using the 8 mm bow sha-
ckle. The shrouds go onto each side of the forestay.
7UDSH]HZLUHV
7UDSH]HZLUHV
6KURXGV
)RUHVWD\
IMPORTANT
: Do not forget to attach the jib ha-
lyard rope to the small single block at the end of
the jib halyard wire. Tie off the jib halyard wire
and rope near the base of the mast.
NB
: If you have chosen the optional spinnaker kit, fit
the spinnaker halyard now, passing it behind the ha-
lyard yoke and around the pulley. Both ends then go
over the shrouds and trapeze wires. One end of the
halyard passes between the spreader arm and brace
on the starboard side of the mast. Secure both ends
near the base of the mast.
Fogh Marine | 416 251-0384 | www.foghmarine.com | [email protected]
