63,11$.(5.,7
Untie the spinnaker halyard from
the base of the mast. Taking the
end of the piece that runs
through the spreaders lead it through
the block at the inner end of the pole.
Then pass it through the sister block
and lead it back to the swivel cam cleat
on the front crossbar. Put a plastic ball
stopper on this end.
NB
: The tack line, sister blocks and
this end of the halyard should hang be-
low all
the wires.
Tie the other end of the spinnaker halyard to the head of the spin-
naker.
The spinnaker sheet (red) can now be rigged as per the schematic.
Tie both ends of the spinnaker sheet to the clew of the spinnaker
using either bowline knots or figure «8» knots.
NB
: ensure that the spinnaker sheet runs through the ratchet blocks in the
right direction.
Stow the spinnaker in the spinnaker bag on the
trampoline.
If the wind is not too strong a trial spinnaker set
and drop is recommended on the beach before
you try it on the water.
Go do the «wild thing».
Fogh Marine | 416 251-0384 | www.foghmarine.com | [email protected]
