35(6$,/,1*
Install the drain plugs – do not overtighten, hand
tight is sufficient. Overtightening may cause the
drain plug flange to distort and cause leakage.
Tension the rig. This can be accomplished by ha-
ving your assistant hang from the trapeze or you
can use mainsheet tension on one side at a time
so that you can adjust the shroud position in the side
stay adjusters.
Fit the daggerboards into the daggerboards wells.
The daggerboard roller shock cord should be tight
enough to prevent the daggerboard from slipping
down.
It is recommended that beach rollers be used to
move your Hobie Fox. This will save your back
and the bottom of the boat.
Always wash traveller with fresh water after use in
salty water.
Always wear your Hobie buoyancy vest, look out for
overhead power lines and HAVE LOTS OF FUN!
Fogh Marine | 416 251-0384 | www.foghmarine.com | [email protected]
