Once the jib is fully raised, take the jib luff ten-
sioner line and secure it to the bottom holes in
the stay adjuster.
-,%
Unroll the jib and open the
zipper on the luff. Using the
4mm bow shackle connect
the tack to the stay adjuster.
Shackle the two clew blocks to
the clew plate using the 4mm
bow shackle provided.
Shackle the jib head to the jib
halyard. Then position the jib
and the halyard line against
the forestay.
Close the zipper ensuring that the ha-
lyard line remains inside the zipper.
As you pull down on the halyard line
close the zipper as the sail is raised.
Now pass the line through the small pulley at the end of
the jib halyard, then back down through the cleat on the
tack of the jib.
Now remove the jib halyard line and stow it in the trampoline po-
cket.
Fogh Marine | 416 251-0384 | www.foghmarine.com | [email protected]
